Share
Out of Stock
Share
Any coins and rounds you have in possession are pieces of history and concrete investments. Maintaining that value against the elements is the main priority. Fingerprints, airborne pollutants, moisture and accidental scuffs and scratches cannot be removed and may permanently destroy the luster and value of a coin.
The Real Air-Tite H39 Direct Fit capsule is the ultimate answer to the serious collector and ensures archival-safe protection that preserves the near mint condition of your 39mm silver rounds indefinitely.
Your collection is well worth the best. These are genuine Air-Tite capsules, which are manufactured in the United States with very strict quality control measurements. It ensures product quality is consistent and of a high level without the flaws and toxic chemicals that plague cheap imitation merchandise usually of foreign origin.
All the capsules are injection molded in a non-yellowing acrylic (Polymethyl methacrylate) that is crystal clear after decades of use. This archival, inert material is more than clear enough and not subject to reacting with anything on either side of the coin or doing any damage to coins.
Unlike soft vinyl flips that break down and will leach plasticizers—leaving a permanent scar of green slime—Air-Tite capsules are made entirely of PVC-free materials, which ensure long-term preservation.
The model H39 is designed around the 39mm diameter coin or round. With no rattling or micro-abrasions, this product guards surfaces and reeded edges because of its snug, direct-fit design.
The thinner cover and base snap securely together with a single firm click, providing a seal against airborne moisture, but one that is accessible when needed.
Capsule is not the only way you can protect your coins. These are the necessary items to provide their complete safety when it comes to handling and environmental conditions.
To a coin collector, selection of a holder is as important as selection of a coin. The poor material may result in damage that would cost a valued piece its value forever. The major offender in the destruction and degradation of coins depends on Polyvinyl Chloride (PVC), a lubricator incorporated into cheap, malleable plastic flips. PVC gradually wears out and releases an acidic oily waste, sometimes named a green slime. This residue also chemically reacts with the metal of the coin to cause permanent pitting and corrosion with tremendous loss of value.
To counter this menace, serious collectors and archival institutions make use of materials that are chemically inert. The Air-Tite capsules are manufactured out of Acrylic (PMMA) is a material infinitely superior to the cheaper Polystyrene that some holders are.
PMMA (acrylic): It is a sturdy polymethylmethacrylate that is crystal clear and has unparalleled strength, high impact resistance, and UV resistance. It is also chemically inert, which is to say that it will not decay or liberate toxic compounds with time. Its UV-blocking actions aid in avoiding environmental toning, and it is therefore the museum-quality option for long-term preservation.
Polystyrene: As polystyrene can also be discussed as a plastic that does not contain PVC, it is more durable, although it possesses poor UV resistance. It is more liable to scratching and is liable to discoloring with age. Although it can be used short-term, it is not permanent or archival when compared to acrylic.
Using a pure Air-Tite capsule manufactured of virgin acrylic, you are buying the most protection your money can buy.
Any coins and rounds you have in possession are pieces of history and concrete investments. Maintaining that value against the elements is the main priority. Fingerprints, airborne pollutants, moisture and accidental scuffs and scratches cannot be removed and may permanently destroy the luster and value of a coin.
The Real Air-Tite H39 Direct Fit capsule is the ultimate answer to the serious collector and ensures archival-safe protection that preserves the near mint condition of your 39mm silver rounds indefinitely.
Your collection is well worth the best. These are genuine Air-Tite capsules, which are manufactured in the United States with very strict quality control measurements. It ensures product quality is consistent and of a high level without the flaws and toxic chemicals that plague cheap imitation merchandise usually of foreign origin.
All the capsules are injection molded in a non-yellowing acrylic (Polymethyl methacrylate) that is crystal clear after decades of use. This archival, inert material is more than clear enough and not subject to reacting with anything on either side of the coin or doing any damage to coins.
Unlike soft vinyl flips that break down and will leach plasticizers—leaving a permanent scar of green slime—Air-Tite capsules are made entirely of PVC-free materials, which ensure long-term preservation.
The model H39 is designed around the 39mm diameter coin or round. With no rattling or micro-abrasions, this product guards surfaces and reeded edges because of its snug, direct-fit design.
The thinner cover and base snap securely together with a single firm click, providing a seal against airborne moisture, but one that is accessible when needed.
Capsule is not the only way you can protect your coins. These are the necessary items to provide their complete safety when it comes to handling and environmental conditions.
To a coin collector, selection of a holder is as important as selection of a coin. The poor material may result in damage that would cost a valued piece its value forever. The major offender in the destruction and degradation of coins depends on Polyvinyl Chloride (PVC), a lubricator incorporated into cheap, malleable plastic flips. PVC gradually wears out and releases an acidic oily waste, sometimes named a green slime. This residue also chemically reacts with the metal of the coin to cause permanent pitting and corrosion with tremendous loss of value.
To counter this menace, serious collectors and archival institutions make use of materials that are chemically inert. The Air-Tite capsules are manufactured out of Acrylic (PMMA) is a material infinitely superior to the cheaper Polystyrene that some holders are.
PMMA (acrylic): It is a sturdy polymethylmethacrylate that is crystal clear and has unparalleled strength, high impact resistance, and UV resistance. It is also chemically inert, which is to say that it will not decay or liberate toxic compounds with time. Its UV-blocking actions aid in avoiding environmental toning, and it is therefore the museum-quality option for long-term preservation.
Polystyrene: As polystyrene can also be discussed as a plastic that does not contain PVC, it is more durable, although it possesses poor UV resistance. It is more liable to scratching and is liable to discoloring with age. Although it can be used short-term, it is not permanent or archival when compared to acrylic.
Using a pure Air-Tite capsule manufactured of virgin acrylic, you are buying the most protection your money can buy.
Affiliations
Copyright BOLD Precious Metals 2026
